The Atlas 408SL super deluxe portable vehicle storage lift is designed for those car enthusiasts that demand the absolute best look in above ground storage lifts. The Atlas 408SL has all the great features of our Atlas Garage Pro Series lifts, but incorporates many features found in our Atlas commercial grade 4-post lifts.

Single Point Lock Release – This Atlas Storage Lift has a manual single point release that allows the operator to release all the safety locks at one time. The spring loaded lock handle and power unit dump valve must be activated at the same time. (two hand operation) If the lock handle is released and the dump valve handle is still being pressed, the lift will continue to descend and all locks will automatically re-engage at the next lower lock point.

Double Lock Safety System – This Atlas Lift locking system offers a unique two position locking mechanism found only in commercial grade cable style four post lifts. The Double Lock Safety System is found exclusively on the Atlas Garage 408SL, Atlas Garage 409HP, Atlas Garage Pro 8000, the Atlas Garage Pro 9000, and the Atlas ST-7000. The Double Lock Safety System is designed to ensure that if a lifting cable becomes slack (for any reason), the secondary locking mechanism automatically engages. This Double Lock Safety System is found only on other four post above ground lifts costing hundreds of dollars more.

Lock Ladder Column Design – This Atlas Lift has a commercial grade lock ladder. We believe that the lock ladder system is the safest locking system for any four post lift. The lock ladder system also provides an infinite number of runway locking positions. The “old-style” welded locks could not be adjusted. The lock ladder is adjustable inside the column so that our customers can “micro-manage” the correct runway height to accommodate any vehicle. The “lock ladder” column system is the same column system found on professional grade lifts found in car dealerships and automotive service centers.

Hidden Cables In Cross Tubes – This lift features a high strength cable system with horizontal cables that are “hidden” inside the cross tubes. Professional grade wheel covers are used to eliminate almost all exposure of cables and double lock system. The high strength cable system is powered by a 110 volt (single phase) power unit to raise and lower the lift. Many competitors use an “old style” chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to “level” properly and the exposed hydraulic cylinder is responsible for numerous “door dings”.

Motor Mounting Configurations – The column you mount the power unit on can be installed in any one of the four corners of the lift. This gives you greater control of where you position your power unit.

Special Bends In Columns – All columns incorporate two special bends which help to increase the column strength. These strategic bends also increase the surface area for the slide block to travel.

Wider Access Between Runways – There is a wider access area between the runways than many other hobby lifts.

Includes Approach Ramps – The included steel approach ramps can be easily removed by raising the lift to waist height, then lifting the ramps out. Each steel approach ramp weighs 46 lbs.

Includes Heavy Duty Jack Tray – The sturdy jack tray allows for the use of floor jacks or bottle jacks to raise part of any vehicle positioned on the lift. The versatile Jack Tray is also great for holding tools when working under a vehicle or as a catch tray when changing fluids or replacing parts. The jack tray features a heavy duty design for safe, reliable support. The jacking tray can also be easily moved from one end of the lift to the other so you can position it where necessary for each job.

Includes (4) Plastic Drip Trays, Caster Kit, and (4) Steel Wheel Stops.

Features

• 8,000 lbs. Capacity
• Higher Quality Powder Coat Finish
• Single-Point Lock Release
• Lock Ladder Design
• Larger Column Size
• Special Bends Increase Column Strength
• Hidden Cable In Cross Tubes
• Commercial Grade Wear Blocks
• Mount Column Can Be Set Up In Any Of Four Corners
• Diamond Plated Steel Runways
• Wider Access Area Between The Runways
• (2) Steel Approach Ramps Included
• (1) Heavy Duty Steel Jack Tray Included
• (4) Plastic Drip Trays Included
• Caster Kit
• (4) Wheel Stops Included

Specifications

• Capacity: 8,000 lbs.
• Lifting Height To Top Of Runway: 69-3/4″ (5′ 9-3/4″)
• Clearance Under Runways: 65″ (5′ 5″)
• Height of Columns: 84″ (7′)
• Overall Width (Without Motor): 106-5/8″ (8′ 10-5/8″)
• Overall Width (With Motor): 117-1/2″ (9′ 9-1/2″)
• Overall Length with Approach Ramps: 208″ (17′ 4″)
• Overall Length without Approach Ramps: 174-1/2″ (14′ 6-1/2″)
• Approach Ramps: 37″ (3′ 1″)
• Runway Width: 20″ (1′ 8″)
• Runway Length: 166-3/4″ (13′ 10-3/4″)
• Runway Thickness: 4-3/4″
• Width Between Runways: 37″ (3′ 1″)
• Width Between Runway Rails: 34-3/8″ (2′ 10-3/8″)
• Outside Runway to Outside Runway: 74-1/2″ (6′ 2-1/2″)
• Size of Column: 7″ x 4-7/8″
• Clearance Between Columns: 95-1/2″ (7′ 11-1/2″)
• Length Between Columns: 156″ (13′)
• Base of Column: 10-1/4″ x 12-7/8″
• Maximum Wheel Base: 159″ (13′ 3″)
• Drive Thru (Outside of tire to outside of tire): 82″ (6′ 10″)
• Cable Diameter: .375″
• Column Thickness of Steel: 3.5mm
• Platform Thickness of Steel: 5mm
• Cross Beam Thickness of Steel: 5mm
• Motor: 1.5HP 110V 1Phase 60Hz
• Electrical Requirement: 30 Amp Breaker is Required
• Oil Requirement: 3-5 Gallons AW32/AW46
• Shipping Dimensions: 21″ W x 32″ H x 172-1/2″ L (21″ W x 2′ 8″ H x 14′ 4-1/2″ L)
• Power Unit and Drip Trays are Packaged on a Separate Pallet.
• Shipping Weight: 1,965 lbs.
• Warranty: 2 Years Structure, 2 Years Hydraulic, No Labor